OEM/ODM High Frequency Pulse Power Supply Factories & Supplier in Rijeka

Thyristor (SCR) rectifiers modulate current at the low line frequency of 50Hz, generating considerable low-frequency ripple (often 5% to 8% or worse without expensive LC filters) and pulling poor overall power factors. In contrast, Fenvix High-Frequency IGBT Switch-Mode Rectifiers operate at 20kHz–50kHz. This elevates dynamic conversion efficiency to >90%, drops current ripple to ≤2%, reduces physical cabinet footprint by up to 60%, and delivers superior current density during metal deposition, preventing rough grain structure and pinholing in marine components.

Yes. Standard configurations are engineered for three-phase 380V/400V/415V AC ±10%, 50Hz/60Hz grid power. Furthermore, for naval operations, dry docks, or export vessels using specialized electrical topologies (such as 440V 60Hz marine three-phase systems or single-phase 220V/230V workshop sources), our internal engineering department customizes the primary rectification stage, phase balancing, and transient surge protective devices (SPDs) to withstand voltage sags and line spikes.

Forced-air cooling is cost-effective and straightforward for laboratory testing, educational institutes, and low-current applications (under 1,000A) operating inside climate-controlled rooms. However, in Rijeka’s coastal plating workshops, galvanic plants, and shipyards, ambient air contains high concentrations of chloride ions (salt-mist) and corrosive acid vapors (e.g., sulfuric or chromic fumes). In these environments, liquid-cooled (water-cooled) architectures are recommended: the electronics cabinet can be completely sealed to an IP54/IP65 grade, with thermal energy rejected via internal water-to-water or closed-circuit chilled loops, shielding IGBT modules from chemical degradation.

Every Fenvix industrial unit is equipped with isolated control interfaces. Digital communications include standard RS485 utilizing Modbus RTU protocol, alongside optional Profibus DP, Profinet, or Ethernet interfaces. For analog control loops, isolated 0–10V, 0–5V, or 4–20mA current loops allow direct interfacing with Siemens, Schneider, or Allen-Bradley PLCs. Hardware interlocks for emergency stop circuits, external water-flow sensors, thermal cutoff trips, and door-switch safety cuts are pre-wired.

Guangdong Fenvix operates an audited ISO 9001:2015 quality management system, and production lines have undergone on-site verification by TÜV Rheinland. Export units comply with European Low Voltage Directive (LVD 2014/35/EU) and Electromagnetic Compatibility (EMC 2014/30/EU), bearing CE marks and RoHS compliance documentation. Each power supply ships with comprehensive factory burn-in test reports, dynamic load-step test certificates, schematic wiring diagrams, and English maintenance manuals.

We provide comprehensive international Incoterms including FOB, CIF (Port of Rijeka), CFR, EXW, and door-to-door DDP (Delivered Duty Paid) throughout Croatia. Shipments are packed in solid, fumigated seaworthy wooden crates with internal vapor corrosion inhibitors (VCI) to protect high-purity copper busbars from humidity during oceanic transport. Express air freight (CIP Zagreb/Rijeka) is available for critical spare components or rapid prototype validation units.