12V 15V 5000A 6000A 75KW Water Cooled Electroplating Rectifier
- Output Range: 0–15V / 0–6000A
- Cooling Design: Deionized Water Forced
- Ripple Factor: ≤ 2% Full Scale
- Topology: High-Frequency IGBT
Industrial Catalogue
Engineered for British Industrial Standards & Precision Demands
Explore our core series of high-frequency rectifiers, programmable laboratory DC racks, and aviation ground power units engineered to CE, RoHS, and UKCA compliance benchmarks.
12V 4000A 48KW Industrial CV CC Plating Rectifier
- Output: 0–12V / 0–4000A
- Efficiency: ≥ 90% at Rated Load
- Digital Interface: RS485 / Modbus RTU
- Compliance: CE, LVD, EMC Ready
8000A 12V Heavy-Duty Water-Cooled Rectifier
- Current Rating: 8000A Continuous
- Cooling Mechanism: Anti-Corrosive Water Tube
- Protection: Over-temp, Short, Phase Loss
- Duty Cycle: 100% 24/7 Execution
800V 50A 20KW Programmable High Voltage Supply
- Voltage Capability: 0–800V Adjustable
- Testing Scope: EV Powertrain / Battery R&D
- Programming: Step, Ramp, Pulse Sequence
- Stability: ≤ 0.1% Line & Load
0–100kV Precision Capacitor Charging HV Supply
- HV Range: 0 to 100kV Continuous
- Control Circuit: Fast Quench & Arc Suppression
- Target Domain: Pulsed Power & Physics Labs
- Repeatability: < 0.05% Between Discharges
Portable 28.5V DC Aviation Ground Power Unit (GPU)
- Output Voltage: 28.5V DC (Overload Capable)
- Peak Starting: Up to 2000A Engine Cranking
- Enclosure: All-Weather Mobile Chassis
- Aviation Standard: ISO 6858 & Mil-STD-704F
40–500kVA Solid-State Static Frequency Converter
- Input/Output: 50Hz/60Hz to 400Hz AC
- Nominal Phase: 115V / 200V 3-Phase
- THD Distortion: < 2% Pure Sine Wave
- Application: Avionics MRO & Hangar Testing
48V 625A 30KW Auto-Polarity Reversing DC Supply
- Reversal Cycle: Programmable Millisecond-Level
- Current Rating: 625A Symmetrical Inversion
- Primary Sector: Electrochemical Descaling
- Cooling: Sealed Air-Duct Design
Industrial Power Architecture for Bristol's Advanced Engineering Ecosystem
The Greater Bristol region, anchoring the UK's high-tech Western Gateway, demands uncompromising precision in power conversion. From the historic aerospace clusters in Filton and Patchway to the composite research facilities across the National Composites Centre (NCC), surface treatment plants in Avonmouth Severnside, and marine tech along the Bristol Channel, power equipment cannot merely operate—it must perform deterministically under rigorous mission profiles.
As a seasoned direct manufacturer, Guangdong Fenvix Technology Co., Ltd. serves the Bristol procurement territory with design-build customisation that eliminates conventional OEM compromises. By leveraging state-of-the-art Insulated-Gate Bipolar Transistor (IGBT) switches operating at 20kHz to 50kHz carrier frequencies, we provide adjustable direct current power systems that deliver immediate energy savings, sub-millisecond dynamic responses, and crystalline stability compared to legacy thyristor/SCR power boxes.
13+
Years of High-Power Switching R&D
≥90%
Conversion Efficiency under Real Load
≤1%
Ultra-Low Output Voltage Ripple
Zero
Minimum Order Quantity on Prototypes
Localized Bristol Application Scenarios
Industrial operations throughout North Somerset, South Gloucestershire, and the City of Bristol operate under distinct environmental, mechanical, and regulatory pressures. Fenvix adjustable DC power units and dynamic converters are specifically deployed across five strategic application domains:
Aerospace Metal Finishing & Anodizing
Bristol's Tier-1 aerostructures supply chain demands exacting AMS 2469, MIL-A-8625 Type III, and DEF-STAN coatings. Our constant-current programmable anodizing rectifiers provide automated ramp-soak current density regulation, preventing burning on expensive titanium and 7000-series structural aluminum components.
Clean Energy & EV Powertrain R&D
Centred near regional clean-tech incubators and motor testing sites, our programmable 400V–2000V DC supplies deliver precise power emulation for EV inverters, fast charging modules, and battery string cycling, featuring seamless LabVIEW integration and sub-5ms transient recovery times.
Aviation Ground Handling & MRO
For operations supporting Bristol Airport (BRS) handling hangars and general aviation airfields, our 28.5V DC mobile units and 400Hz solid-state static converters replace noisy diesel APUs, offering emission-free, pure sine wave power for avionics instrument calibrations and turbine spin-up tests.
Continuous Heavy Strip Plating & Electroforming
Our 5000A to 15000A high-current water-cooled rectifiers operate inside aggressive electroplating plants in industrial zones. Featuring totally sealed heat exchangers, electronic boards remain completely isolated from corrosive acid vapor, guaranteeing five-nines uptime in heavy reel-to-reel processes.
Electrolytic Wastewater & Descaling
Bristol Channel water treatment operations and maritime cooling units utilise our microsecond-level automated polarity reversal supplies. Reversing the polarity automatically dissolves scale build-up on electrodes without manual pickling, driving operational maintenance costs down sharply.
Capacitor Charging & Defense Research
South West academic laboratories and defense institutions require 0–100kV rapid capacitor charging modules for pulse physics and plasma generation. Fenvix chargers feature integrated dump circuitry, minimal overshoot, and full short-circuit protection against rapid spark breakdown.
Regional Development Trends Impacting Bristol Power Procurement
British industrial operations face structural shifts driving energy modernisation across the board:
1. Decarbonisation and Grid Efficiency: Industrial energy pricing across the UK has amplified scrutiny on power supply loss. Traditional transformer-rectifier systems rarely eclipse 75% efficiency and subject distribution lines to heavy harmonic distortion. Fenvix active-rectified IGBT topologies sustain 90%+ operating efficiency with line power factors exceeding 0.95, directly mitigating peak industrial grid penalties.
2. Smart Automation and Scada Integration: Modern installations across Bristol are heavily integrated into networked PLCs. All Fenvix systems come standard with isolated RS485 (Modbus-RTU) communication, with options for Profinet, Ethernet/IP, and 0–10V/4–20mA analog loop control, enabling predictive diagnostics and full real-time load telemetry.
3. Transition from Scrubbed Air to Closed-Loop Water Cooling: As health and safety regulations clamp down on workshop aerosol emissions, modern plating lines are moving away from pulling shop air through electronic racks. Our closed-loop deionized liquid cooling systems vent thermal heat externally, eliminating chemical ingress completely.
Comprehensive Engineering Specification Matrix
Select your deployment specification from our modular platform framework below:
| Process Profile | Standard Output Spec | Harmonic Distortion / Ripple | Regulation Mode | Recommended Thermal Topology |
|---|---|---|---|---|
| Aerospace Hard Anodizing | 0–150V DC / 100–3,000A | Ripple ≤ 1.5% RMS | CC / CV Ramp Profiles | Forced Air or Water Cooled |
| Heavy Precious Plating (Au, Ag, Cu) | 0–12V, 0–24V / Up to 15,000A | Ripple ≤ 2% Full Scale | Current Density Tracking | Closed-Loop Water Cooling |
| EV Battery / Inverter Bench | 0–800V, 0–1200V / 20–120kW | Low Noise < 0.2% RMS | Arbitrary Waveform Output | Intelligent Temperature-Managed Fan |
| Electrolytic Descaling & Clean Tech | 24–48V DC / 100–1,200A | Standard Industrial ≤ 3% | Auto-Polarity Reversal | Corrosion-Resistant Sealed Air Duct |
| 400Hz Aviation Ground Power | 115V / 200V AC 3-Phase (400Hz) | THD < 2.0% Pure Sine | Static Voltage Stabilization | Rugged Modular Air Chassis |
| High-Voltage Capacitor R&D | 10kV to 100kV DC / 1–500mA | Residual Peak-to-Peak < 0.1% | Constant Current Charger | Solid Dielectric / Oil Enclosed |
Why Bristol Buyers Partner with Guangdong Fenvix Technology
Procuring capital power equipment from overseas can introduce logistical, verification, and support hesitations. Fenvix eliminates these hurdles through end-to-end manufacturing ownership, accredited quality controls, and verifiable factory engineering:
True OEM/ODM Direct Ownership: Unlike sourcing brokers or catalogue resellers, Fenvix maintains an integrated 3,000 m² production complex in Guangdong. From plate shearing, CNC punching, milling, drilling, and busbar bending to transformer winding, surface mount technology, and high-pot burn-in chambers, every critical assembly process happens on our shop floor.
Verified Testing & Credentialing: Our quality management operates under strictly audited ISO 9001 standards. Selected units carry full conformity with CE, RoHS, Low Voltage Directive (LVD 2014/35/EU), and Electromagnetic Compatibility (EMC 2014/30/EU). Our facilities have been independently verified on-site by TÜV Rheinland, ensuring international buyers receive genuine specification fidelity.
Flexible Engineering Without Minimums: We recognize that precision aerospace programs and University of Bristol spin-outs often require one-off prototypes before scaling into production. We enforce zero MOQ, welcoming single-unit bespoke designs alongside containerized batch orders.
Seamless UK Door-to-Door Logistics: We regularly support Bristol buyers across varied Incoterms: CIF Southampton/Port of Bristol (Avonmouth), FOB Shenzhen, or complete DDP (Delivered Duty Paid) directly to your industrial gate, absorbing customs clearance, tariff categorisation, and overland haulage.
Frequently Asked Questions by Bristol & UK Importers
Are Fenvix power supplies compatible with UK 400V 50Hz grid standards?
Yes. All export systems bound for the United Kingdom are configured natively for 3-phase 400V AC ± 10% (or single-phase 230V AC) at 50Hz. Internal control transformers, contactors, and rectifiers are engineered to accommodate UK supply voltage fluctuations without tripping thermal or overvoltage safeties.
How do you substantiate CE / UKCA compliance for British workplace safety inspections?
Fenvix power supplies are built and assessed against relevant harmonized European and British standards, including EN 61010-1 (Electrical Safety) and EN 61000-6-2/4 (EMC Immunity and Emission). Comprehensive test reports, Declarations of Conformity, and schematics are furnished alongside dispatch documentation to facilitate immediate PUWER (Provision and Use of Work Equipment Regulations) clearance.
Can you tailor cabinet footprints to fit legacy crane lines or compact lab benches?
Yes. Because we engineer our structural sheet metal and copper distribution tracks in-house, we can adjust cabinet heights, access doors, top or bottom cable entry glands, and crane eyelets to match specific footprint constraints inside your plant.
What failsafe mechanisms are embedded to protect high-value workpieces?
Our switch-mode DC architectures incorporate ultra-fast hardware-level short-circuit suppression (< 10 microseconds), transient arc detection, output overvoltage clamping (OVP), overcurrent limiting (OCP), phase-loss monitoring, and multiple internal thermal sensors. In the event of a bath short or sudden electrode touch, output drive cut-off is instantaneous.
How does Fenvix manage warranty fulfillment and technical support across time zones?
We provide standard comprehensive 12-to-24-month warranties. Standard troubleshooting and telemetry consultations are handled directly by qualified power electronics engineers via email or video call within one business day. Critical spares—including driver boards, control cards, and IGBT packs—are modular plug-and-play modules dispatched via express air freight (DHL/FedEx) to Bristol within 3 to 5 business days.