Water-Cooled
12V 15V 5000A-6000A 75kW Water-Cooled DC Rectifier
- Topology: High-Frequency IGBT
- Output: 12V/15V | 5000A-6000A
- Cooling: Deionized Water/Closed Loop
- Regulation: CV/CC Digital Display
Export-Ready Industrial Platforms
Industrial-Grade DC Power Supplies & Rectifiers
Modular switch-mode architectures configured for 400V 50Hz European mains, designed with CE compliance, low electrical ripple, and continuous 24/7 industrial duty cycles.
Electroplating
12V 4000A 48kW High-Frequency Plating Source
- Efficiency: ≥ 90% at Rated Output
- Ripple: ≤ 2% RMS Low Harmonic
- Interface: RS485 Modbus-RTU / 0-10V
- Duty Cycle: 100% Non-Stop 24/7
High Current
8000A 12V Heavy-Duty Water-Cooled Galvanizing Source
- Output Power: 96 kW High Density
- Protection: Over-temp, Short, Phase loss
- Chassis: Anti-Corrosion Coated Steel
- Application: Hard Chrome, Galvanizing
Anodizing
100A–3000A Precision Anodic Oxidation Rectifier
- Output: 12V / 24V / Variable
- Control: Programmable Current Ramp
- Display: Digital Touchscreen / HMI
- Standard: CE, ISO 9001 Tested
EV & R&D
800V 50A 20kW Programmable High-Voltage DC Source
- Voltage Range: 0–800V Continuous Adj.
- Transient Speed: < 5ms Dynamic Response
- Features: Battery Simulation, Step Test
- Use: EV Powertrain & Solar Inverters
High Voltage
80kW 1000V–3200V HV Precision DC Test Power
- Isolation: High Galvanic Voltage Barrier
- Accuracy: ±0.5% Full Scale Voltage
- Capacitor Mode: Constant-Current Charging
- Compliance: LVD / EMC Certified
Water Treatment
48V 625A 30kW Automatic Polarity-Reversing DC Supply
- Cycle Control: Programmable Auto Reversal
- Switch Time: Sub-second Transition
- Process: Electrochemical Descaling
- Cooling: Corrosion-Resistant Forced Air
Aviation GSE
Portable 28.5V DC Aircraft Ground Power Unit (GPU)
- Output: 28.5V DC | 100A–600A Peak
- Overload: Engine-Start Surge Capability
- Mobility: Heavy-Duty Casters & Handle
- Standard: Aviation MIL / Civil Specs
Engineering Whitepaper & Market Integration
Precision Power Delivery for Liechtenstein's High-Tech Industries
Vaduz and the surrounding Rhine Valley industrial corridor host world-class engineering clusters. Here is how Fenvix DC regulated systems integrate with localized production standards.
Micro-Component Surface Finishing & Thin-Film Metallurgy
The manufacturing ecosystem in Vaduz, Schaan, and Balzers is globally recognized for high-vacuum thin film technologies, precision tooling, automotive mechanical systems, and dental instrument fabrication. These applications depend on ultra-consistent current density across delicate substrates.
Traditional silicon-controlled rectifiers (SCR) present ripple factors of 5% or higher, causing micro-pitting, uneven crystal nucleation, and non-uniform electroplated layer thickness. Fenvix high-frequency switch-mode power supplies (SMPS) utilize high-speed IGBT arrays switching at frequencies between 20 kHz and 50 kHz. This converts raw 400V 50Hz grid AC into smooth DC with current ripple lower than 1% to 2% RMS, directly enabling high-adhesion gold, silver, hard chrome, and titanium anodizing on precision tooling.
±0.5%
Current Stability Index across dynamic thermal swings from 10% to 100% duty load, matching Swiss-Liechtenstein metrology specifications.
Automotive E-Mobility Test Stands & Renewable Storage Development
With Liechtenstein’s deep supply-chain integration into the European automotive and e-mobility sectors, local test facilities demand programmable DC power supplies capable of simulating high-voltage EV battery banks (400V / 800V architecture). Fenvix programmable DC power supplies deliver up to 3200V DC and 120kW single-cabinet capacity with rapid slew rates and low transient recovery times under 5 milliseconds.
Through bi-directional communication (RS485 Modbus, CANopen, or isolated analog 0-10V/4-20mA), test engineers in Vaduz can automate step profiles, voltage droop curves, and thermal runaway simulations via LabVIEW or automated SCADA environments.
Industrial Decarbonization & Wastewater Descaling
Liechtenstein's stringent environmental codes require closed-loop water stewardship and chemical-free heat exchanger maintenance. Fenvix automated polarity-reversing DC power supplies facilitate electrolytic descaling and advanced electrochemical oxidation without hazardous additives. Programmable forward/reverse timers periodically reverse anode and cathode polarities, dislodging scale encrustations without manual chemical rinsing.
Technical Compliance Matrix
Rhine Valley Infrastructure & Electrical Alignment
Configured specifically to match electrical grid standards and operational conditions in the Principality of Liechtenstein.
| Grid & Operational Parameters | Vaduz / Liechtenstein Norm | Fenvix Engineering Implementation |
|---|---|---|
| Input Voltage & Frequency | 3× 400V AC (±10%), 50Hz Mains | Universal 380V-415V AC ±15% tolerance, active power factor correction (PFC > 0.94) |
| Low-Voltage Directive (LVD) | EN 61010-1 / EN 60950-1 | Fully CE certified, high-potential isolation, reinforced galvanic insulation barrier |
| Electromagnetic Compatibility (EMC) | EN 61000-6-2 (Immunity), EN 61000-6-4 (Emission) | Multi-stage EMI/RFI filtration preventing high-frequency noise injection into plant SCADA |
| PLC Integration Standards | Siemens, Beckhoff, Schneider Industrial Bus | Standard isolated RS485 Modbus-RTU, optional Profinet/EtherCAT interface modules |
| Cooling Medium Infrastructure | Closed industrial chilling loops, deionized water | Anti-corrosion SS316/titanium internal cooling manifolds with leak-detection sensors |
Strategic Development Vectors
Emerging Power Supply Trends in the Vaduz Industrial Area
Key technological shifts dictating how Liechtenstein procurement managers and plant engineers configure their future power infrastructure.
High-Efficiency Switch-Mode Transition
With Swiss and Liechtenstein industrial electricity pricing emphasizing green energy efficiency, heavy SCR units (yielding 70-75% efficiency) are rapidly being decommissioned. Fenvix switch-mode IGBT topologies deliver steady 90-93% electrical conversion efficiency, saving tens of thousands of kilowatt-hours annually on high-amperage lines.
Remote Telemetry & Predictive Maintenance
Automated manufacturing operations in Liechtenstein minimize floor supervision. Our next-generation DC supplies offer full status transmission—logging internal heatsink temperatures, IGBT duty stress, flow rates, and millivolt-level ripple variations via factory Ethernet or serial pipelines.
Compact Modular Footprint
Real estate inside modern Alpine workshops commands premium capital. Water-cooled Fenvix cabinets yield three times the power density of older air-cooled configurations, freeing critical floor space for robotic pick-and-place systems and chemical handling stations.
Direct Source Manufacturer
Direct Factory Engineering from Guangdong to Vaduz
Operating since 2013, Guangdong Fenvix Technology Co., Ltd. eliminates trading intermediaries. We provide verified manufacturing control across sheet metal cutting, busbar CNC machining, transformer winding, assembly, and rigorous load testing.
Main Assembly Floor
Quality Inspection Line
CNC Busbar Milling
Full-Load Burn-In & Oscilloscope QA
100%
Pre-Shipment Factory Burn-In Verification: Every DC power supply shipped to European buyers undergoes uninterrupted full-load heat runs, dielectric breakdown tests, and oscilloscope harmonic analysis under our ISO 9001 certified and TÜV Rheinland-inspected protocols.
Procurement Intelligence
Frequently Asked Questions by Technical Buyers in Vaduz
Direct answers addressing freight, certifications, voltage compatibility, and customization terms for Liechtenstein purchasers.
How are Fenvix DC power supplies configured for Liechtenstein's three-phase grid?
All equipment destined for the Vaduz market is configured out-of-the-box for European 3-phase 400V AC (±10%) at 50Hz, neutral-ground bonded configurations. Control transformers and cooling pump motors match 230V/400V 50Hz ratings, eliminating the need for external line conditioners or frequency adjustments.
What international quality certifications accompany each shipment to Liechtenstein?
Our manufacturing facility in Guangdong operates under an audited ISO 9001 Quality Management System, verified independently on-site by TÜV Rheinland. Export power systems carry CE declarations of conformity encompassing the Low Voltage Directive (LVD 2014/35/EU) and Electromagnetic Compatibility Directive (EMC 2014/30/EU), alongside RoHS compliance certificates for hazardous substance restriction.
Can Fenvix accommodate single-unit prototype or custom OEM orders (No MOQ)?
Yes. We enforce no Minimum Order Quantity (MOQ = 1 unit). R&D teams, university laboratories, and equipment builders in Liechtenstein frequently commission single custom units with proprietary voltage curves, specific PLC communications (such as isolated analog boards or RS485), and unique chassis dimensions.
When should a Vaduz plant specify water cooling over air cooling?
We strongly recommend closed-loop water cooling for applications exceeding 30kW or currents above 2000A—particularly in electroplating, anodizing, or chemical pickling facilities where acidic vapors and ambient dust compromise air-cooled heatsinks. For clean analytical laboratories and electrical test benches, forced-air cooling remains the preferred zero-maintenance option.
What incoterms, payment options, and delivery logistics are supported?
We support standard international commercial terms including EXW, FOB, CIF, and full DDP (Delivered Duty Paid) directly to your facility in Liechtenstein, handling customs clearance through Swiss-Liechtenstein customs union channels. Payments can be settled via wire transfer (T/T), Letter of Credit (L/C), or commercial card in CHF, EUR, or USD.
What remote or on-site engineering support is available for European clients?
Every power supply is accompanied by comprehensive English schematics, terminal connection maps, and operating manuals. Our engineering division provides live video commissioning, real-time troubleshooting, and direct replacement module dispatch. On-site technical assessment and third-party audit validation are also supported.
Request a Tailored Technical Proposal for Your Vaduz Facility
Provide your target load parameters—voltage range, peak current, ripple tolerance, and communication protocol. Our senior electrical engineering team will return a dimensioned drawing, electrical schematic, and quotation within 24 business hours.