CE Certified
12V/15V 5000A-6000A 75kW Water-Cooled Rectifier
- Output: 12V–15V / 5000A–6000A
- Control: CV / CC Digital Display
- Cooling: Direct Deionized Water
- Application: Hard Chrome & Heavy Zinc
Technical Leadership
Engineering Superior Electrochemical Efficiency for Western Balkan Industry
As industrial manufacturing expands across Tirana, Durrës, Elbasan, and Shkodër, industrial electroplaters demand energy-efficient, robust direct-current rectifiers to replace obsolete silicon-controlled (SCR) units. Guangdong Fenvix Technology delivers customized, high-precision DC power architectures designed for demanding non-ferrous refining, chrome passivation, automotive hardware electroplating, and aerospace surface treatment.
Industrial Portfolio
Recommended Plating & Surface Treatment Power Supplies for Albania
Explore our heavy-duty IGBT switching rectifiers and programmable test systems engineered for continuous operation, corrosive environments, and precise metallurgical tolerances.
High Precision
12V 150A Compact High-Frequency Plating Unit
- Output: 0–12V / 0–150A Continuous
- Ripple Factor: ≤ 1% Full Range
- Cooling: Forced Low-Noise Air
- Application: Precious Metals & Electronics
48kW IGBT
12V 4000A 48kW Industrial Electroplating Source
- Power: 48kW High Switching Rate
- Topology: Modular Dual Inverter
- Interface: RS485 Modbus-RTU / 0-10V
- Application: Automotive Hardware Barrel Line
Heavy Galvanizing
8000A 12V High-Amperage Water-Cooled Rectifier
- Output: 12V / 8000A Non-Stop
- Enclosure: IP54 Sealed Cabinet
- Protection: Over-Current, Phase Loss
- Application: Continuous Strip Galvanizing
Anodic Profile
100A–3000A Programmable Anodizing Rectifier
- Output: 12V/24V up to 3000A
- Programming: Multi-Step Current Ramp
- Control: Programmable Microcontroller
- Application: Architectural Profile Anodizing
E-Coat / Cataphoretic
5000W Precision Electrophoresis DC Source
- Input Voltage: 380VAC ± 15% 3-Phase
- Output: Wide-Range HV / 20A
- Ramp Rate: Soft-Start Interlock Logic
- Application: Electrophoretic Paint (E-Coat)
Polarity Inversion
48V 625A Auto Polarity Reversing Rectifier
- Power: 30kW Continuous Inversion
- Switching: Electronic H-Bridge Bridge
- Timing: Forward / Reverse Cycle Timer
- Application: Electrolytic Descaling & Etch
High Power
300kW 20V 15000A Heavy Electrolysis Station
- Current: 15,000A Ultra-High Output
- Efficiency: ≥ 92% at Peak Rated Load
- Busbar: T2 Red Copper Terminals
- Application: Smelting, Refining & Extraction
Localized Integration
Engineered for Albania’s Growing Industrial Ecosystem
Albania's expanding industrial footprint requires electrochemical equipment that handles local grid variations, Mediterranean thermal humidity, and specific metallurgical workflows.
Elbasan Heavy Metallurgy & Steel Finishing
The industrial corridor of Elbasan represents Albania's heart of metallurgy. Our heavy-current 10,000A–15,000A water-cooled rectifiers provide steady DC power for electro-galvanizing structural rebar, wire drawing coatings, and continuous steel tube corrosion protection, maintaining ≤2% ripple even during municipal grid voltage sags.
Tirana & Durrës Architectural Aluminum Anodizing
Driven by coastal infrastructure projects and urban high-rise construction, extrusion factories in Tirana and Durrës rely on our programmable anodic oxidation rectifiers. Multi-step voltage ramping profiles eliminate "burning" and uneven oxide layer thickness on large-format profile extrusions in compliance with Qualanod architectural standards.
Automotive Components & Export Galvanizing
Suppliers manufacturing machined brass, fasteners, and zinc-diecast parts for European automotive supply chains utilize our 12V 4000A–6000A units. Ultra-fast short-circuit protection and constant current density ensure defect-free plating on complex geometries, minimizing rejection rates on high-speed barrel lines.
Coastal Marine Hardware & Durrës Port Refurbishment
The maritime atmosphere around the Port of Durrës causes severe chloride corrosion. Local electroplating and refurbishment workshops install Fenvix sealed IP54 water-cooled rectifiers to run hard chrome plating on hydraulic pistons, winch cylinders, and marine bronze bushings without atmospheric air salt ingress.
Industrial Wastewater Treatment & Descaling
Environmental standards across Albania require closed-loop wastewater recovery. Our automatic polarity-reversing 48V 625A power units operate automated electrocoagulation and electrochemical precipitation cells, self-cleaning electro-deposited scale from electrode plates to drastically reduce plant downtime.
Mining Mineral Extraction & Precious Metal Recovery
Albania's rich chromite and copper mining operations in Bulqizë and Kukës utilize specialized electrolysis rectifiers. Featuring 100% duty cycles and integrated current telemetry, Fenvix DC stations power electrowinning cells to recover pure metal concentrates with consistent thermal stability.
Market Intelligence
Emerging Strategic Trends in the Albanian Plating & Surface Finishing Sector
A technical assessment of modernization drivers transforming procurement specifications across the Western Balkans.
Transition from Legacy SCR to High-Frequency IGBT
A majority of workshops in Albania historically utilized bulky 50Hz thyristor (SCR) rectifiers characterized by 65–72% low efficiency, high harmonic distortions, and sluggish response times. Factory managers are transitioning to high-frequency IGBT converters, delivering up to 25% energy savings and near-instantaneous output regulation down to 5ms.
Harmonization with EU Ecological & RoHS Norms
As Albania advances its European Union accession trajectory, local metal finishing facilities must comply with strict REACH, RoHS, and integrated pollution prevention directives. Low-ripple rectifiers (≤1%) drastically enhance chemical bath throwing power, reducing heavy metal drag-out and consumption of hazardous plating chemistry by 12–18%.
Integration of SCADA & Industry 4.0 Telemetry
Modern production facilities across Tirana and Shkodër are investing in automated lines where human error is minimized. Fenvix systems come equipped with standard RS485 Modbus, Profibus, or analog 4–20mA interfaces, providing direct SCADA connectivity for real-time ampere-hour logging, bath diagnostics, and preventative thermal alarms.
Sealed Water-Cooling for Aggressive Chemical Environments
Airborne hydrochloric and sulfuric acid fumes common in pickling and chrome tanks quickly corrode internal electronic modules. The Albanian industry is increasingly opting for 100% sealed IP54 enclosures with liquid-to-water cooling manifolds, isolating IGBTs from caustic fumes and extending device longevity beyond 10 years.
Grid Fluctuation Tolerance & Wide Voltage Margins
Industrial power grids in regional manufacturing zones often experience ±10% to ±15% voltage swings, especially during peak summer seasons. Fenvix electroplating rectifiers integrate high-surge DC bus capacitors and fast-acting digital phase-tracking software that stabilize electrodeposition current despite severe grid transients.
Direct Factory OEM Sourcing from Certified Chinese Makers
Rather than purchasing re-badged units through regional intermediaries at steep markups, Albanian procurement specialists are engaging direct with verified Tier-1 Chinese manufacturers. ISO 9001 certified engineering, direct component availability, customized copper busbar routing, and 0 MOQ policies yield high capital efficiency.
Technical Benchmark
Engineering Selection Matrix for Industrial Surface Finishing
Compare standard configurations designed for surface treatment, hard anodizing, electrophoresis, and industrial water processing.
| Plating / Electrochemical Process | Typical Voltage & Amperage | Cooling Topology | Crucial Engineering Specifications | Fenvix Recommended Series |
|---|---|---|---|---|
| General Electroplating (Zn, Ni, Cr, Cu) | 0–12V / 0–15V, 500A–15,000A | Water-Cooled / Forced Air | ≤ 2% RMS Ripple, CC/CV modes, Soft-Start ramp (0-99s) | High Frequency Plating Rectifier |
| Precious Metals (Au, Ag, Rhodium, PCB) | 0–12V, 50A–300A | Forced Air Cooling | ≤ 0.5% Ultra-low ripple, Ampere-hour counter, 0.1A precision | Precision Digital Bench Rectifier |
| Hard & Decorative Anodizing | 0–24V / 0–150V, 300A–5,000A | Air or External Chiller | Programmable stepped current ramp, pulse profile, anodize timer | Anodic Oxidation Rectifier |
| Electrophoretic Coating (E-Coat / CED) | 0–300V / 0–600V, 20A–200A | Forced Air / Water | High-voltage smooth ramp, short-to-ground interlock safety | Electrophoresis Paint Power Supply |
| Electrochemical Water Treatment & Descaling | 0–48V, 200A–2,000A | Sealed Air / Water | Automatic polarity reversal (0-999 min), RS485 telemetry | Polarity Reversing DC Power Supply |
| Industrial Electrowinning & Smelting | 10–60V, 5,000A–15,000A+ | Pure Deionized Water | Heavy T2 red copper busbars, continuous 24/7/365 full-load duty | Heavy-Duty Electrolysis Rectifier |
Manufacturing Pedigree
Guangdong Fenvix Technology Co., Ltd. – True Factory Direct Advantage
Operating since 2013 from Guangzhou, Guangdong, Fenvix maintains comprehensive in-house mechanical fabrication, SMD assembly, transformer winding, and rigorous full-load testing bays.
Full-Cycle Production Control – From Sheet Metal to 100% Full-Load Burn-In
Unlike trading assemblers who outsource critical processes, Fenvix controls every manufacturing stage. We operate our own precision metal punching, shearing, milling, drilling, and tapping equipment. Our high-frequency nanocrystalline transformers and high-purity T2 copper busbars are designed and wound in-house to minimize eddy current losses and ensure maximum power efficiency.
- 3,000 m² Production Facility: Dedicated assembly lines, PCB testing stations, and high-voltage burn-in enclosures.
- Over 50 Qualified Raw Material Suppliers: Premium Infineon/Fuji IGBT modules, Mitsubishi drivers, and Japanese electrolytic filter capacitors.
- 100% Rigorous Factory Load Testing: Every custom rectifier undergoes a minimum 24-hour continuous resistive/inductive load burn-in with oscilloscope ripple inspection.
- TÜV Rheinland Verified On-Site: Independent third-party audit confirming mechanical capacity, export standards, and operational transparency.
Assembly Floor
Rectifier Cabinets
Wiring & Inverters
Commissioning Bay
Plate Shearing
Cabinet Punching
Busbar Milling
Waveform Quality Test
Global Reliability
Verified Compliance & Streamlined Logistics to Durrës Port
Complete regulatory compliance and experienced freight handling guarantee frictionless delivery to your Albanian facility.
Rapid Manufacturing
Standard 100A–3000A rectifiers dispatched within 7–10 days; heavy custom 15,000A water-cooled units within 3–4 weeks.
Export Sea/Air Packaging
IPPC-certified fumigated solid wooden crates, internal moisture-barrier vapor foil, and high-impact shock absorption.
Flexible Incoterms
Full support for CIF Port of Durrës, CIP Tirana Airport, FOB Guangzhou/Shenzhen, or DDP directly to your factory door.
Comprehensive Warranty
12-month complete factory warranty, lifetime technical advisory, schematic support, and fast air courier of spare boards.
Procurement FAQ
Frequently Asked Questions by Albanian Industrial Buyers
Answers to common questions regarding local grid adaptation, cooling logistics, trade terms, and remote commissioning.
Can Fenvix rectifiers accommodate Albanian three-phase power standards and voltage fluctuations?
Yes, perfectly. Standard industrial power across Albania operates at 400V AC ± 10%, 50Hz 3-phase. Our input rectification modules are custom-rated for 380V–415V ± 15% tolerance. They feature integrated surge arresters, AC phase-loss monitoring, and high-frequency active filtering to protect sensitive internal electronics from regional voltage dips and sudden brownouts.
When should our factory choose liquid water-cooling over forced air-cooling in Albania?
Air-cooled units are practical and economical for small-to-medium workshops up to 2000A in clean ambient conditions. However, for installations exceeding 3000A, or where the equipment sits in unconditioned spaces or close to acidic plating tanks (such as hard chrome, pickling, or anodizing lines in Durrës or Elbasan), water-cooling is highly recommended. Our water-cooled systems are completely sealed to IP54, preventing corrosive salt air and acid mist from degrading the semiconductors and copper coils.
What is your minimum order quantity (MOQ) and lead time for shipments to Albania?
Our Minimum Order Quantity is 0 MOQ (1 Set). Whether you require a single 12V 150A prototype unit for laboratory testing or multiple 8000A water-cooled rectifiers for an automated galvanizing line, we cater directly to your engineering needs. Standard units ship within 7–10 working days, and maritime freight to the Port of Durrës typically requires 28–35 days transit.
How is remote commissioning and after-sales service handled for plants in Albania?
All Fenvix rectifiers are shipped pre-calibrated with comprehensive English wiring schematics, pinout diagrams, and terminal blocks. We provide video technical commissioning support directly with your plant electricians. Our modular sub-rack architecture ensures that in the rare event of a component failure, plug-and-play driver boards or IGBT banks can be air-couriered via DHL/FedEx and replaced within 30 minutes without moving the entire cabinet.
Which trade payment terms and foreign currencies does Fenvix support?
We work comfortably with standard international trade terms including FOB (Chinese ports), CIF (Durrës Port), CFR, and EXW. For transaction settlements, we accept T/T (Telegraphic Transfer) and confirmed Irrevocable Letters of Credit (L/C). Commercial invoices can be settled directly in EUR (€) or USD ($), providing frictionless banking through Albanian financial institutions.
Can Fenvix rectifiers interface with our existing plant SCADA or PLC automation systems?
Yes. Every Fenvix power system comes standard with an isolated RS485 communication port running standard Modbus-RTU protocol. We can also provide isolated 0–10V / 4–20mA analog voltage and current programming interfaces, digital dry contacts for running/alarm status, and emergency-stop circuit loops to integrate seamlessly with Siemens, Schneider, or Omron PLCs on your plating line.
Upgrade Your Plating Infrastructure with China’s Leading Rectifier Factory
Speak directly with a senior electrochemical power engineer. Send us your required DC voltage, peak current, cooling preferences, and plating application to receive an engineered technical proposal and firm quote within 24 hours.